Dante enabled Products from Absolute Broadcast
Dante Logo.png
DirectOut ExboxMD rear

EXBOX.MD is a Dante / MADI converter linking Audinate’s audio networking technology Dante and MADI. Fibre and Coax MADI and dual power redundancy

Glensound Inferno commentary box from Absolute Broadcast

The Glensound Inferno Commentator box can be used on its own when connected to a Dante audio network. Many audio routers, consoles and intercom systems are Dante compatible, and will accept the Inferno link, enabling Glensound grade commentary into your audio network. There are primary and secondary Dante network connections, programmable On A Dante Audio Network

Yamaha Dante MY16 AUD2 card

Dante-MY16-AUD2 card is a fully compatible Yamaha Mini-YGDAI standard card that instantly Dante enables your Yamaha mixer, processor or power amp. Each Dante-MY16-AUD2 provides 16 bidirectional audio channels (8 at 96 kHz) and full Dante network audio redundancy over Gigabit Ethernet.

Yamaha Logo.jpg
Ferrofish A32 Dante 3:4 view

The Ferrofish A32 Dante brings all interfaces, whether analog, MADI or ADAT, together using the integrated routing matrix in the Dante network.

CEDAR DNS8 Dante from Absolute Broadcast

The Cedar DNS 8D is a new 8-channel dialogue noise suppressor, incorporating a Dante interface in addition to its AES3 audio connections via DB25. Takes all the very best bits of the original DNS8 Live, mixes them with the DNS2 producing an enhanced noise suppression algorithm

cedar Logo.png
Studio Technologies M362 Listen Only Dante IFB Presenter reporter box

The Model 362 Listen-Only Beltpack from Studio Technologies is a self-contained 2-channel user device that supports headphone monitoring of two audio channels associated with the Dante® audio-over-Ethernet media networking technology.

studio-technologies logo.png
Glensound Devine Dante Speaker

Glensound 'Devine' Dante Speaker. This is a 'Fostex' sized foldback and monitoring speaker, with the fundamental difference of being a Dante POE device, with 4 selectable channels which can be mixed together if desired. The inputs are selected from Dante Controller in the usual way and the unit is driven from GlenController.